Venev Diamond Stropping Compound Sampler (8 grits)

In case you are not sure what grit you need for your work, you can use the compound sampler. It consists of 8 grits from coarse 60 microns to ultra-fine 0.5 microns. The paste of every grit is inside a small handy tube.

Diamond Compound can be used with any strop made of smooth or coarse leather, balsa or felt. Smooth leather is the best strop material for Diamond Compound 

Diamond Compound does not require any preparations. However, you can experience difficulty taking the compound from the syringe if your air temperature is below 20°C (68°F). In such a case, you can slightly warm the compound to make it molten. Take a small amount of compound and evenly distribute it to the surface of the strop.

You will not be able to fully remove the compound after applying it to the strop. If you want to use your strop both with and without compound, you must, therefore, keep one side clean. If you want to switch between one compound and another, consider buying an extra strop.

Compound residue accumulates in the leather during stropping. If stropping performance gets worse, remove the residue with a knife spine or special tool, and apply the fresh compound.

 wt is 0.1 kg